Spray Tone

Price: $16.95

Item Number: 04122

Manufacturer: Armstrong

Manufacturer Part No: 817710

Spray Tone reconditions and restores the beauty of Hartco Hartwood flooring.

Important! Only use Spray Tone on Hartco Acrylic Impregnated wood floors that do not have the Permion finish.

Directions:
For Touch-up in small areas. Apply Spray Tone to a clean cloth and then wipe on the scratch, spot or small area in question until the color blends.

For reconditioning large areas or the entire floor:
1. Once the area is cleaned and ready for reconditioning, shake Spray Tone well with the child resistant closure still on the bottle. Remove the closure and put the spray nozzle on the bottle.

2. Spray a small amount on a 3'x 3' section.

3. Immediately buff with a slow speed (less than 1000 RPM) buffer and a medium coarse nylon pad (equivalent to 3M's red pad).

4. Apply and buff only enough Spray Tone on the floor to achieve an even coat. Applying too much Spray Tone may result in a sticky/gummy surface.

5. A second application can be applied, if desired, over the first application as soon as the first coat is buffed thoroughly.

6. The spray nozzle can be cleaned for future use by pumping mineral spirits through the nozzle.

7. Replace the child resistant closure on the bottle.

Important:
Wait at least 24 hours, or until the Spray Tone is thoroughly dry before application on Hartco Spray Shield or Pattern-Plus Shine.

Spray Tone Coverage:
One pint covers approximately 875 square feet.
This product has a shelf life.